thixotropic additive for silicone

THIXOTROPIC ADDITIVE FOR SILICONE

Thixotropic agent is a liquid additive that, when mixed with 2-component silicones, converts them into non-fluid pastes. These are used for the preparation of vertical moulds or skin moulds.

This thixotropic agent is compatible with RTV LC-17 silicone.

How to use:

1. Pour between 0.5% and 3.0% relative to the weight of the silicone and catalyst mixture.

2. Stir until the final mixture reaches a pasty consistency.

3. The resulting mixture can be applied with a spatula. Successive layers may be added as long as the
previous one has not completely hardened.

Appearance: Straw-coloured liquid.
Active matter: 100%.
Viscosity at 25 ºC: 900 cSt.
Density at 25 ºC: 1.04 g/cm³.

Regulation (EU) No 1272/2008:

H361f Suspected of damaging fertility.

P201 Request special instructions before use.
P202 Do not handle this substance until you have read and understood all the safety instructions.
P280 Wear protective gloves/clothing/eye protection/face protection.
P308+P313 IF EXPOSED or concerned: Get medical advice/attention.
P405 Keep under lock and key.
P501 Dispose of contents/container in accordance with current local legislation.

Contains: Octamethylcyclotetrasiloxane.