montana wepro plastic primer spray

Montana WEPRO spray primer for plastics for surfaces such as polypropylene and other plastics.

High adhesion and elasticity.

Very fast drying (10 min touch dry).

A resistant first coat in crafts, DIY or automotive.

Instructions for use:
- Shake the aerosol very well before use, approximately one minute after hearing the sound of the mixer.
- Apply to clean and dry surfaces. On any plastic surface, check the product behaviour.
- Apply in thin coats for best results, two thin coats are always better than one thick one. Can be repainted after ten minutes with the same paint.
- Invert the aerosol to purge the valve after its use. If the nozzle becomes clogged replace it with a new one.
- Do not apply to connected equipment and use in well-ventilated areas.