montana wepro metallic spray paint

Montana WEPRO acrylic metallic spray paint with vibrant and metallic colours for highly glossy finishes on any surface.

Very fast drying (10 min touch dry) and high elasticity.

It can be varnished, although it maintains its gloss without a subsequent varnish.

Contains no lead and has high hiding power and adhesion.

Instructions for use:
- Shake the aerosol very well before use, approximately one minute after hearing the sound of the mixer.
- Apply to clean and dry surfaces. On rusty metal surfaces: Remove corrosion with a wire brush and apply an anti-rust primer if considered necessary. On plastics and polyesters apply an anchor coat. On metal surfaces apply a coat of anti-rust primer.
- Apply in thin coats for best results, three thin coats are always better than one thick coat. You can apply another coat of the same paint after ten minutes.
- Invert the aerosol to purge the valve after use, if the nozzle becomes clogged replace it with a new one.
- Do not apply to connected equipment and use in well-ventilated areas.