montana wepro contact adhesive spray

Montana WEPRO contact adhesive in aerosol format.

Film-forming adhesive with high immediate adhesion.

The most suitable materials for gluing are: polyurethane and polyethylene foams, fibres, paper, cardboard, cork and carpet.

Drying in 10-60 minutes.

Instructions for use:
- Remove the nozzle from the can and insert the filling cup into the valve.
- Apply to clean and dry surfaces.
- Spray generously on both sides to be joined, allow the solvents to evaporate for 5-10 minutes and then join the elements with firm pressure.
- Invert the aerosol to purge the valve after use, if the nozzle becomes clogged replace it with a new one.
- Do not apply to connected equipment and use in well-ventilated areas.