3m spray mount repositionable adhesive

3M SPRAY MOUNT REPOSITIONABLE SPRAY ADHESIVE

- Especially for layouts, posters, presentations, graphic designs, etc.
- Allows for multiple repositioning before final gluing.
- 3M Spray Mount adhesive spray is widely used by design and advertising agencies to present creative mounts for their clients.
- Use for multiple joints of lightweight materials.
- Provides instant, secure, repositionable bonds that do not become brittle over time.
- It is transparent, does not wrinkle, does not stain and does not yellow over time.
- Do not use with vinyl or expanded polystyrene foam.
- It does not damage the ozone layer.

Regulation No. 1272/2008 (CLP):

Indications of danger:
H222 Extremely flammable aerosol.
H229 Pressurised container. May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

General prudential advice:
P102 Keep out of reach of children and pets.

Prevention:
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261A Avoid breathing vapours.

Response:
P305 + P351 + P338 IN CASE OF EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Storage:
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 ºC/122 ºF.

Disposal:
P501 Dispose of container and contents in accordance with local regulations.